By Porter Lang
Pick up a roll and the first question is practical. How thick is it? Wikipedia gives Number 8 wire as 0.16 inch, or 4.064 mm, and says that since 1976 it has officially been called 4.0 mm gauge wire. Te Ara, the government encyclopaedia, rounds it to a gauge equivalent to 4 mm. Same wire, two ways of writing the number.
The gauge
Wikipedia says the name comes from the British Standard Wire Gauge, where the wire is gauge number 8.
Before wire
Te Ara says heavy annealed iron wire was available in the 1850s, but it was thick, came in short lengths and was hard to keep taut. Henry Bessemer patented his steel-making process in 1855, which allowed lighter-gauge wire to be made cheaply. Wikipedia places the arrival of steel wire in the 1860s and says it was quickly adopted on New Zealand sheep farms. Te Ara says that from about 1864 newspaper advertisements for wire and iron standards became common.
The sources differ slightly on timing: iron wire in the 1850s on one page, steel wire in the 1860s on the other. They are describing different wire, so we read them as compatible.
Putting up a fence
Te Ara describes fences built in sections called strains, with heavier, longer strainer posts at each end. In the 1860s and 1870s a sheep-station fence typically had five plain wires, iron standards 2.7 m apart and ten strainer posts per mile (1.6 km). Later, Te Ara says, North Island fences typically used five posts and 25 wooden battens every 20 m. South Island fences usually had posts every 20 m with ten light metal battens or three Y-standards between them, and wooden battens were uncommon there.
Te Ara says Canterbury’s 1860 Cattle Trespass Ordinance required wire fences to be white, and that barbed wire appeared in New Zealand by early 1879, first called “American wire”. Wikipedia says that on dairy and cattle farms barbed wire was added as a top wire alongside No. 8.
How fast it spread
By 1878, Te Ara says, 77 per cent of the fenced area in New Zealand was enclosed with wire, 82 per cent of that in the South Island. By mid-1879 Moa Flat Station had 402 km of wire fencing. Wikipedia says galvanised No. 8 became the preferred standard, and Te Ara calls it the most widely used fencing wire through the first half of the twentieth century.
What replaced it
Both sources point to the 1960s. Wikipedia says that from the early 1960s high-tensile wire of 12½ gauge, 2.5 mm, largely replaced No. 8 for fencing. Te Ara adds that it is cheaper because more length comes per tonne, though it is harder to cut and tie, and that in the 2000s farmers used about five times as much 2.5 mm wire as No. 8. It also says that most farm fences since the 1960s use tanalised pine posts, where native timber, with tōtara the most popular, had been the standard until the 1950s.
Other fences get a line each in Te Ara. Electric energisers were built by Bill Gallagher and Herbert Christie separately around 1938, with trials at Massey in 1958. In Whangārei district, 156 km of stone walls were laid between the 1850s and the 1930s, built without mortar by the double-dyke method. Hedges were cheap and gave shelter, but gorse and broom, among the commonest hedge plants, became highly invasive.
The saying
Te Ara says the wire gave rise to the New Zealand notion of the “No. 8 wire mentality”: making or repairing things with basic materials. Wikipedia describes it as the ability to repair or build machinery from available scrap, notes that remote farms often kept rolls on hand for jobs beyond fencing, and says the Waikato Museum runs an art award named after the wire.
Our reading is that the phrase outlived the thing it names. A farmer today is more likely to be stringing 2.5 mm high-tensile than No. 8, yet the saying still stands for improvising with what is to hand.
Dates in order
- 1850s: heavy annealed iron wire, according to Te Ara.
- 1855: Bessemer patents steel-making, according to Te Ara.
- 1860: Canterbury ordinance on white wire fences, according to Te Ara.
- 1860s: steel wire adopted on sheep farms, according to Wikipedia.
- 1878: 77 per cent of fenced area enclosed with wire, according to Te Ara.
- Early 1879: barbed wire, according to Te Ara.
- Around 1938: electric energisers, according to Te Ara.
- Early 1960s: high-tensile 2.5 mm wire, according to Wikipedia.
- 1976: official name 4.0 mm gauge wire, according to Wikipedia.
Side by side
Wikipedia: 0.16 in, 4.064 mm, preferred standard. Te Ara: equivalent to 4 mm, most widely used through the first half of the twentieth century. These do not contradict each other, and we put them together for that reason.
What kind of sources these are
Wikipedia, open to anyone to edit, and Te Ara, a government encyclopaedia with an article on farm fencing. No manufacturer or fencing-trade page loaded, so tensile strengths and tools are not covered. Legal rules on boundary fences, which Te Ara mentions, are left out.
What we left out
Prices, a how-to for building a fence, and the deer-fence rules, which are specific to another kind of stock.
Quick answers
How thick is Number 8 wire? Wikipedia gives 0.16 inch, or 4.064 mm. Te Ara, a government encyclopaedia, describes it as equivalent to 4 mm.
What replaced Number 8 wire on farms? According to Te Ara, high-tensile 12½ gauge wire of 2.5 mm, introduced in the 1960s, because more length comes per tonne.
What is the Number 8 wire mentality? Te Ara says it is the New Zealand notion of making or repairing things with basic materials.
Related on this site: nelson-tasman-bay-sunshine-pottery-city, crown-lynn-swan-vase-new-lynn-pottery, jandal-name-yock-trademark-new-zealand
Roam first. Shop later.