Blades, machines and a stubborn record: how a New Zealand sheep gets shorn

By Porter Lang

Blades about 22 centimetres long, joined by a spring bow. That is the kit Te Ara describes for the first shearers, and it is where any honest account of a woollen thing has to start. Before the yarn, the spinner or the knitter comes a person bent over a sheep.

The first sheds

Te Ara, the government encyclopaedia, says demand for shearers rose in the mid-1840s and the first shearers came from Australia. Two men it names as the first identifiable New Zealand shearers worked at Saddle Hill, Otago, in 1849. About 1857 the first modern-style shearing shed, with a slatted floor, was built at St Leonards in the Amuri district. By the 1870s large sheds were common.

The numbers from the blade era are modest and then not. In 1856, Te Ara says, a gang of eight at Te Awaiti near Martinborough shore 8,256 sheep. One man’s best day was 79, and the average was about 35 a day. By the 1870s daily tallies were 70 to 80, with top “guns” reaching 100.

Machines arrive

Frederick York Wolseley, an Australian sheepgrower, invented the shearing machine, according to Wikipedia, and it says machines were made in Birmingham and introduced after 1888. Te Ara dates the first public demonstrations to 1885 in Australia and the first New Zealand machines to the late 1880s, at Galloway in Otago and Flaxbourne in Marlborough. They were steam-driven at first, later electric. Te Ara says they gave about 0.45 kg more wool per sheep.

Gear matters here, so it is worth noticing what changed. A hand-cranked machine gave way to electric motors and flexible shafts, Wikipedia says. Combs changed too. Te Ara says wide combs of 90 to 100 mm replaced the convex combs of 60 mm or less used in the 1950s and early 1960s. Wikipedia adds that Australia legalised wide combs in 1984, the last country to do so.

The brothers’ pattern

After the Second World War, Te Ara says, two brothers developed a pattern of 55 blows for a fully grown crossbred sheep. The best shearers today take fewer than 50. Wikipedia dates the brothers’ technique to around 1950 and mentions a separate Tally-Hi method from 1963, promoted by the Australian Wool Corporation, which it says saves about 30 seconds a sheep.

Tallies

A “gun” is a shearer paid per sheep who tallies more than 200 a day, says Wikipedia, and a professional takes two to three minutes a fleece. Te Ara gives older marks. In 1888, it says, a man from Whanganui was the first to shear 100 sheep in a day by machine, in New South Wales. A shearer dominated East Coast and Hawke’s Bay sheds from the late 1890s to about 1908, several times shearing more than 330 sheep in a day. A blade record of 327 sheep, set in 1976, is described as unbeaten. Today’s champions, Te Ara says, have shorn over 850 lambs or 720 adult sheep in a nine-hour day.

Golden Shears

Wikipedia says the Golden Shears was first held in 1961 in Masterton and is held each March at the War Memorial Stadium. Te Ara agrees on the year and adds that the brothers finished first and second. The competition has five shearing classes, four woolhandling classes and three woolpressing classes. In the open final six shearers each shear 20 second-shear sheep, and the lowest score, time plus quality penalty points, wins. Entries have passed 600 in peak years. The first world championships were held in England in 1977.

Inside a shed

Te Ara describes a typical gang as four or more shearers with at least as many shed hands. The jobs have names: the ganger, the penner-up, the fleece-o, the table hand, the wool classer and the presser. Wikipedia describes the table slats as about 12 cm apart so that locks and debris fall through, and says fleeces are skirted, rolled and classed, then pressed into bales.

Shearing mostly ran from November to February, in two-hour runs between smoko breaks, according to Te Ara. Wikipedia’s general article says most shearing is done in spring but happens in all seasons. After the war, Te Ara says, many North Island crossbred flocks went to two shearings a year, so the work ran about ten months of the year.

Dates in order

  • 1849: first identifiable New Zealand shearers at Saddle Hill, according to Te Ara.
  • 1856: the Te Awaiti gang’s 8,256 sheep, according to Te Ara.
  • About 1857: first modern-style shed at St Leonards, according to Te Ara.
  • 1885: public demonstrations of machines in Australia, according to Te Ara.
  • Late 1880s: first New Zealand machines, according to Te Ara.
  • About 1950: the brothers’ technique, according to Wikipedia.
  • 1961: first Golden Shears, according to Wikipedia and Te Ara.
  • 1976: blade record of 327, according to Te Ara.
  • 1977: first world championships, according to both.

Side by side

The two sources differ on small things. Te Ara has the brothers’ pattern “post-war” and Wikipedia says around 1950. Te Ara gives November to February as the season and Wikipedia says spring. On one date they agree: the Golden Shears page says machine contests ran at least as early as 1902 at the Hawke’s Bay show, and Te Ara records a Hawke’s Bay contest that year. Our reading: the broad story is shared and the details vary with the source’s purpose. That is our inference.

What kind of sources these are

Te Ara is a government encyclopaedia. Wikipedia’s articles on sheep shearing and the Golden Shears can be edited by anyone. We read no competition body, wool board or farm page.

Questions a buyer would ask

Was the fleece shorn this year, and in which month? Who classed it? Is the wool sold on a farm’s own name or through a marketer? We name no farm, brand or product.

What we left out

We left out the names of living competitors and the record tallies attached to them, and we left out any mention of animal welfare rules, because we did not read a source on them. Prices and wages are also out.

Quick answers

When was the first Golden Shears held? According to Wikipedia and Te Ara, in 1961 in Masterton. Wikipedia says it is held each March.

What is the brothers’ technique? Te Ara says two brothers developed a pattern of 55 blows for a fully grown crossbred sheep. The best shearers now take fewer than 50.

When did machine shearing reach New Zealand? Te Ara says in the late 1880s, first at Galloway in Otago and Flaxbourne in Marlborough, steam-driven at first.

Related on this site: arthurs-pass-village-railway-tunnel-kea, new-zealand-bach-crib-holiday-house, why-new-zealanders-are-called-kiwis

Roam first. Shop later.

/sell-with-sephari/

Scroll to Top